EMP Power Line Filter MTK4E400 

Specifications:

  • 4 X 400 Amps circuits.

  • 600 VDC, 0-277 Vac Line to Neutral.

  • 0-480 Vac Line to Line

  • 0-60 Hz.

FEATURES

 

  • Meets or exceeds MIL-STD-188-125

  • Designed, manufactured and tested to the applicable portions of MIL-F-15733.

  • Each Individual filter circuit is replaceable in the field without the use of special tools.

  • Each individual filter is hermetically sealed.

  • Terminals: Each circuit is terminated with a flexible lead to an electrical standoff preventing damage to the terminals.

  • Maximum voltage drop: 2 Volts.

  • Maximum operating Temperature 85ºC.

  • Overload safety: 140% rated current for 15 minutes.

  • Case: Steel all welded construction suitably plated on groundng surfaces and painted or plated on all other surfaces.

10KHz                100KHz                   1MHz                    10MHz                 100MHz                 40GHz

                                FREQUENCY                                          

Insertion Loss: 100db from 14 KHz to 40 GHz measured in accordance with MIL-STD-220A, load condition.

* Add "Z" to end of part number for inside shield mounting.

Typical EMP Performance

MTK-E SERIES.png

DIMENSIONS:

A:           39

B:           74

C:           14

Aprox. Weight: 700lbs

jJobs  |  www.mtkelectronics.com

MTK Electronics, Inc.  |  1 National Blvd., Medford, NY, 11763  |  Tel.: (631) 924-7666  |  Fax:  (631) 924-7179

Privacy Policy

© 2017